Blumi kataloog ja tehniline juhend 2020/2021

FHo Y 27 Catalogue 2020/2021 • KA-140 Drilling position Space requirement TKH = FHo (mm) x 2 + gaps Front assembly CLIP top 120° hinge CLIP top centre hinge MD Front overlay FA (mm) 5 6 7 8 9 10 11 12 13 14 15 16 17 0 3 4 5 6 3 3 4 5 6 6 3 4 5 6 9 3 4 5 6 MD Mounting plate spacing (mm) Drilling distance TB MD Horizontal gap F (mm) between fronts 3 4 5 6 0 6 5 4 3 3 6 9 MD Mounting plate spacing (mm) INSERTA | EXPANDO Overview – AVENTOS HF 23 Order specification – wooden fronts and wid e alu frames 24 Planning – Blum distance bumper 33 Planning – SERVO-DRIVE switch 33 Machine directive 665 AVENTOS HF – bi-fold lift system ◀ Standard | SERVO-DRIVE ◀◀ Asymmetrical Wooden fronts and wide alu frames Theoret. cabinet height TKH (mm) H (mm) 480–549 TKH x 0.3 – 28 550–1040 TKH x 0.3 – 57 4 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, left only * Drilling depth 5 mm ** Alternative drilling TKH Theoretical cabinet height FHo Upper front height FHu Lower front height Opening angle stop Y (mm) Without FHo x 0.44 + 38 104° FHo x 0.24 + 34 83° 0 FHo Upper front height The larger front must be at the top! Theoret. cabinet height TKH (mm) X (mm) 177H3100 | 177H3100E | 177H3100E10 | 177H5100 | 175H3100 | 175H4100 175H5400 | 177H5400E 480–549 FHo / 2 + 70 FHo / 2 + 68 550–1040 FHo / 2 + 47 FHo / 2 + 45 FHo Upper front height FHu Lower front height FAu Bottom front overlay SFA Front overlay of the side panel TB Drilling distance F Gap FA Front overlay () CLIP top 120° special hinge TB Drilling distance F Min. gap 1.5 mm * 37 mm for cruciform mounting plates (37/32) With the CLIP top 120° special hinge, the front overlay FA is always 2 mm larger Lift systems Planning Webcode DQD8YM Drilling distance TB Screw-on Page instructions Assembly, removal and adjustment Short-URL www.blum.com/a110 Lift systems

RkJQdWJsaXNoZXIy NDg2NzA=