Blum catalogue and technical manual 2020/2021

36 74 44 Catalogue 2020/2021 • KA-140 Drilling position 5 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, left only Space requirement Front assembly – wooden fronts and wide alu frames Wall application: min. gap required 5 mm Front assembly – narrow alu frames Wall application: min. gap required 5 mm Narrow alu frames For frame width 19 mm, a side front overlay SFA of 11–18 mm is possible Space requirement – cornice | crown Top panel thickness SOB (mm) X (mm) 16 28 18 30 19 31 Connecting piece ▶ AVENTOS HL – lift up ▶▶ Standard | SERVO-DRIVE Wooden fronts, wide and narrow alu frames SOB Top panel thickness * Drilling depth 5 mm ** Alternative drilling Lever arm set LH min. (mm) ¹ Y (mm) ¹ Standard SERVO-DRIVE 20L3200.06 21L3200.01 262.0 264.0 20L3500.06 21L3500.01 312.0 352.0 20L3800.06 21L3800.01 362.0 440.0 20L3900.06 21L3900.01 412.0 529.0 ¹ Dimensions based on lower gap F = 0 mm LH Internal cabinet height KH Cabinet height Lever arm set a (mm) b (mm) ¹ c max. (mm) Standard SERVO-DRIVE 20L3200.06 21L3200.01 114.0 257.0 159.0 20L3500.06 21L3500.01 146.0 345.0 209.0 20L3800.06 21L3800.01 178.0 433.0 259.0 20L3900.06 21L3900.01 210.0 522.0 309.5 ¹ Dimensions based on lower gap F = 0 mm KH Cabinet height Lever arm set X (mm) Standard SERVO-DRIVE 20L3200.06 21L3200.01 153 20L3500.06 21L3500.01 203 20L3800.06 21L3800.01 253 20L3900.06 21L3900.01 303 FAo Upper front overlay SFA Front overlay of the side panel Lever arm set X (mm) Standard SERVO-DRIVE 20L3200.06 21L3200.01 153 20L3500.06 21L3500.01 203 20L3800.06 21L3800.01 253 20L3900.06 21L3900.01 303 FAo Upper front overlay SFA Front overlay of the side panel * When changing material thickness, adjust the assembly dimensions accordingly Lift systems Planning Webcode DQDB2M Lift systems