Blum Catalogue and technical manual 2020/2021

Ø 10 + 0.1* ̶ 0.1 1 2 3 555 Further products Fixing systems ◀ Catalogue 2020/2021 • KA-140 Fixing system for thin fronts – EXPANDO T Planning Area of application – EXPANDO T EXPANDO T is suitable for fixing Blum fittings to thin front materials in furniture manufacturing With sufficient stability and strength, front materials of 8 mm thickness and above may be used Area of application and assembly recommendation Materials tested by Blum Transverse tensile strength (N/mm²) Min. tightening torque (Nm) Chipboard > 0.40 1.5 MDF > 0.60 1.5 HDF 2 HPL 2 Mineral composites 2 Nero Assoluto natural granite stone 3 Quartz composite artificial stone 3 Ceramic plates 3 Drilling depth | screw selection – EXPANDO T Screws with M4 thread have to be used for EXPANDO T single The lowest possible drilling depth should be selected for the single dowel, depending on the screw length BT Drilling depth ES Screw penetration depth ES min. = 4 mm ES max. = BT – 0.5 mm * Stone and ceramic +0.2/–0.1 mm Assembly – EXPANDO T Limitation of liability Blum accepts no liability for the use of EXPANDO T in combination with materials not listed or fittings from other manufacturers It is recommended that the assembly be carried out by an experienced furniture manufacturer Page instructions Overview – further products 545 Overview – AVENTOS HS 35 Overview – AVENTOS HL 41 Overview – AVENTOS HK top 47 Overview – CLIP top BLUMOTION | CLIP top – hinges 75 Overview – LEGRABOX 205 Front/base stabiliser for thin fronts 244 More on our new EXPANDO T fixing system Short-URL www.blum.com/EXPANDO_T_3 Assembly, removal and adjustment Short-URL www.blum.com/a720 Further products

RkJQdWJsaXNoZXIy NDg2NzA=