Blum catalogue and technical manual

172 Hinge systems 〉 TIP-ON for doors 〉 TIP-ON 956x Catalogue 2022/2023 • KA-150 TIP-ON 956. – short version with magnet Order information Colour TIP-ON spring Part no. SW | CS | R7036 Standard spring 956.1004 Consisting of: 1 x TIP-ON 956. – short version with magnet 1 x Glue-on catch plate Not suitable for powder-coated, waxed or oiled surfaces 1 x Screw-on catch plate 1 x Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 Colour CS Carbon black R7036 RAL 7036 platinum grey SW Silk white Planning Front gap () Screw-on catch plate Glue-on catch plate FA Front overlay Screw-on catch plate FA Front overlay * 3 mm offset installation TIP-ON 956A – long version with magnet Order information Colour TIP-ON spring Part no. SW | CS | R7036 Standard spring 956A1004 Consisting of: 1 x TIP-ON 956A – long version with magnet 1 x Glue-on catch plate Not suitable for powder-coated, waxed or oiled surfaces 1 x Screw-on catch plate 1 x Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 Planning Front gap () Screw-on catch plate Glue-on catch plate FA Front overlay Screw-on catch plate FA Front overlay * 3 mm offset installation TIP-ON 956A – long version with bumper Order information Colour TIP-ON spring Part no. SW | CS | R7036 Standard spring 956A1006 Strong spring 1 956A1006F Consisting of: 1 x TIP-ON 956A – long version with bumper No catch plate needed (we recommend using a catch plate for very soft surfaces) 1 Recommended for applications that require high ejection forces, e.g. narrow fronts with large number of hinges Planning Front gap Reference pages Overview 171 Accessories – straight adapter plates 173 Accessories – cruciform adapter plates 173 Assembly Drilling template for BLUMOTION | TIP-ON 666 Positioning template for catch plate 687 MINIPRESS top for EASYSTICK 610 MINIPRESS top 614 Assembly, removal and adjustment Short URL www.blum.com/a230 Hinge systems ▬ For overlay fronts (up to approx. 1300 mm height) ▬ For use with unsprung Blum hinges ▬ For drilling or in combina- tion with adapter plates ▬ Output path approx. 17 mm ▬ Setting +4/–1 mm ▬ Material: nylon ▬ For overlay fronts (starting at approx. 1300 mm height) and all inset appli- cations ▬ For use with unsprung Blum hinges ▬ For drilling or in combina- tion with adapter plates ▬ Output path approx. 38 mm ▬ Setting +4/–1 mm ▬ Material: nylon ▬ For use with sprung Blum hinges ▬ For drilling or in combina- tion with adapter plates ▬ Output path approx. 38 mm ▬ Setting +4/–1 mm ▬ Material: nylon