Blum catalogue and technical manual

34 Catalogue 2022/2023 • KA-150 Wooden fronts, wide and narrow alu frames Planning Drilling position 5 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, left only SOB Top panel thickness * Drilling depth 5 mm ** Alternative drilling Space requirement Front assembly – wooden fronts and wide alu frames Use 4 chipboard screws (609.1x00) for wooden fronts Use 4 counter sunk self tapping screws (660.0950) for wide alu frames FAo Upper front overlay SFA Front overlay of the side panel Wall application: min. gap required 5 mm Front assembly – narrow alu frames FAo Upper front overlay SFA Front overlay of the side panel Wall application: min. gap required 5 mm Narrow alu frames For frame width 19 mm, a side front overlay SFA of 11–18 mm is possible * When changing material thickness, adjust the assembly dimensions accordingly Space requirement – cornice | crown Gap F (mm) X max. (mm) Y max. (mm) 3.0 35 101 2.0 31 101 1.5 28 101 Connecting piece Web code DQDADA Dimensions depend on tilt setting Lift systems 〉 AVENTOS HS – up and over lift system 〉 Standard | SERVO-DRIVE Lift systems

RkJQdWJsaXNoZXIy NDg2NzA=