Blum catalogue and technical manual

1/2 1/2 374 Box systems 〉 SERVO-DRIVE for LEGRABOX | MERIVOBOX | TANDEMBOX 〉 Applications Catalogue 2022/2023 • KA-150 Sink cabinet Planning Cabinet Cross member – attachment bracket 1 tier Centre piece LEGRABOX | MERIVOBOX | TANDEMBOX A Distance between the bottom edge of the attach- ment bracket and the bottom edge of the drive unit X Drilling position * Measured from cabinet front edge W Distance between front edge of drawer base and back edge of centre piece W = NL drawer side exterior – NL drawer side interior LEGRABOX: min. 150 mm MERIVOBOX: min. 150 mm TANDEMBOX: min. 100 mm NL Nominal length Box systems Back Back height A (mm) LEGRABOX Centre piece N | M | K | C | F 45 MERIVOBOX Centre piece N 28 M | K | E 45 TANDEMBOX Centre piece N 28 M | K | B | C | D 35 A Distance between the bottom edge of the attachment bracket and the bottom edge of the drive unit Cross member – attachment bracket 1 tier Box systems Back Back height Internal cabinet width LW (mm) ≥ 387 Nominal length exterior NL (mm) 450–650 X (mm) Z (mm) LEGRABOX Centre piece N | M | K | C | F W + 27 LW / 2 MERIVOBOX Centre piece N | M | K | E W + 27 LW / 2 TANDEMBOX Centre piece N | M | K | B | C | D W + 27 LW / 2 BT Drilling depth LW Internal cabinet width W Distance between the front edge of the drawer base and the centre piece X Drilling position Z Dimension of engagement Cabinet bottom – drilling pattern Lower cabling BT Drilling depth Alternative drilling pattern for MINIPRESS top and MINIPRESS BT Drilling depth Front assembly – position of Blum distance bumper The Blum distance bumper creates and maintains the required trigger path of 2 mm When using a 70 kg LEGRABOX, 70 kg MERIVOBOX or 65 kg TANDEMBOX runner, attach four Blum distance bumpers For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay FH Front height Box systems