NL + 3 209* 4.1 1 3.1 3.2 4.2 3.3 9 2.1a 2.1b 2.1c 2.2a 2.2c 2.2b 284 Box systems 〉 MERIVOBOX 〉 Sink cabinet Catalogue 2022/2023 • KA-150 Space requirement NL Nominal length * Incl. 2 mm tilt adjustment Order information 9 BOXCAP left /right Colour SW-M | IG-M | OG-M Nominal length NL (mm) Part no. Nominal length NL (mm) Part no. 450 ZL4.450S.E 550 ZL4.550S.E 500 ZL4.500S.E 600 ZL4.600S.E Colour Colour SW-M Silk white mat t OG-M Orion grey mat t IG-M Indium grey mat t Accessories Web code DQJD7Y ▬ With centre piece for optimal use of storage space ▬ Can be combined with standard components ▬ Distinctive drawer side design ▬ Drawer side straight on the inside with flush cover cap ▬ Synchronised feather-light glide ▬ Includes an integrated BLUMOTION damping ef fect for sof t and ef for tless closing, and can be combined with SERVO -DRIVE or TIP-ON BLUMOTION ▬ Inser t the front in the holding position and simply clip on (easy at tachment even if pull-out is already in place) ▬ Tool-free front assembly ▬ 3-dimensional front adjustment High fronted pull-out – BOXCAP – E – centre piece 3.1 External chipboard back fixing left /right Colour Material Part no. SW-M | IG-M | OG-M Steel ZB4E000S 3.2 Internal chipboard back fixing left /right Colour Material Part no. SW-M | IG-M | OG-M Steel ZB4M000S 4.1 Front fixing bracket Fixing method Part no. EXPANDO T 4 x ZF4.10T2 Screw-on¹ 4 x ZF4.1002 INSERTA fixing is not possible in combination with a centre piece EXPANDO T suitable for thin fronts – see reference pages Note The front fixing bracket must be installed turned through 180° for centre piece assembly! ¹ Screws not included in scope of deliver y 4.2 Front fixing bracket, top Fixing method Part no. EXPANDO T 2 x ZF4.50T2 INSERTA 2 x ZF4.50I2 Screw-on – pre-mounted chipboard screw, Ø 3.8 x 11.4 mm 2 x ZF4.5002 Screw-on – countersunk screw¹ 2 x ZF4.5012 EXPANDO T suitable for thin fronts – see reference pages ¹ Countersunk screw with head diameter max. 7 mm, thread diameter max. 4 mm – screw not included in scope of deliver y 3.3 Chipboard back fixing cover cap Colour Version Part no. SW-M | IG-M | OG-M Symmetrical 2 x ZB4M00AK – Chipboard screws Ø (mm) Length (mm) Part no. 3.5 15 ¹ 609.1500 3.5 17 ² 609.1700 ¹ For connecting the cabinet profile to the cabinet ² For front fixing – System screw Ø (mm) Length (mm) Part no. 6 14.5 ¹ 661.1450.HG ¹ For connecting the cabinet profile to the cabinet 1 Cabinet profiles left /right Version BLUMOTION Nominal length NL (mm) Dynamic carrying capacity (kg) 40 70 450 450.4501B 453.4501B 500 450.5001B 453.5001B 550 450.5501B 453.5501B 600 450.6001B 453.6001B 2.1 Drawer side set exterior Drawer side height (mm) 91 Nominal length NL (mm) Colour SW-M | IG-M | OG-M 450 470M4502S 500 470M5002S 550 470M5502S 600 470M6002S Consisting of: 2.1a 1 x Lef t /right drawer sides 2.1b 2 x Branding element, stamped with Blum logo, star ting at 1000 pcs. individually printed 2.1c 2 x Cover caps 2.2 Drawer side set interior Drawer side height (mm) 91 Nominal length NL (mm) Colour SW-M | IG-M | OG-M 300 470M3002S 350 470M3502S 400 470M4002S 450 470M4502S Consisting of: 2. 2a 1 x Lef t /right drawer sides 2. 2b 2 x Branding element, stamped with Blum logo, star ting at 1000 pcs. individually printed 2. 2c 2 x Cover caps For ef fective use of storage space, we recommend Nominal length NL drawer sides exterior (no 2.1) – nominal length NL drawer sides interior (no 2.2) = min. 150 mm Box systems
RkJQdWJsaXNoZXIy