520 Runner systems 〉 SERVO-DRIVE for MOVENTO | TANDEM 〉 Applications Catalogue 2022/2023 • KA-150 Cabinet with inset fronts Planning Cabinet Position – drive unit LH Internal cabinet height PL Bracket profile length Position – drive unit Runner systems Drawer height SKH (mm) Internal cabinet width LW (mm) 224 –234 235 – 428 ≥ 429 A (mm) E min. (mm) A (mm) E min. (mm) A (mm) E min. (mm) MOVENTO ≥ 79 – – 60 74 35 49 TANDEM ≥ 79 55 71 55 71 35 51 A Distance bet ween the bot tom edge of the cabinet profile and the bot tom edge of the drive unit – Not possible E Distance bet ween the bot tom edge of the cabinet top panel and the fixing position of the runner Cabinet bottom – drilling pattern Lower cabling Back cabling BT Drilling depth BT Drilling depth BT Drilling depth Front assembly – position of Blum distance bumper TANDEM Inner drawer The Blum distance bumper creates and maintains the required trigger path of 2 mm Runners Pull- out type B (mm) C (mm) 56XH | 56XF Full extension 16.5 ±1 12.0 ±1 55XH | 55XF Single extension 18.5 ±0.5 13.5 ±0.5 Front thickness FD (mm) Drilling depth BT (mm) Adjustment area (mm) 13.0 10.0 +1.75 / – 0.25 Star ting at 14.5 11.5 ±1.75 PL = LH – 10 mm Round down to the nearest tenth Alternative drilling pat tern for MINIPRESS top and MINIPRESS Runner systems
RkJQdWJsaXNoZXIy