1b 1g 1e 1c 2 1d 3 1a 1f 1h 1h 14 x 574 Further products 〉 Cabinet applications Catalogue 2022/2023 • KA-150 SPACE STEP Web code DQHKHA Order information 1 SPACE STEP set Nominal length NL (mm) Colour Part no. 410 Orion grey mat t Z95.4100 460 Orion grey mat t Z95.4600 Consisting of: 1a 1 x TANDEM 561Hxxx1B95 lef t /right 1b 2 x Ver tical suppor t 1c 2 x Corner connector 1d 2 x Suppor t feet 1e 2 x Rear panel bracket 1f 1 x Front connector (magnet and catch plate) 1g 4 x Blum distance bumper Cabinet width KB > 900 mm, use 4 Blum distance bumpers 1h 2 x Sticker (safety information and manufacturer information sticker) – 14 x Flat headed screws Ø 4 x 15 mm – 1 x Installation instructions 2 Horizontal profile Material Length (mm) Part no. Aluminium 1040 Z95Q1040A For cut ting to size Recommendation Cabinet width KB 1200 mm, use 2 pcs. to prevent excessive bending Cutting Internal cabinet width LW – 130 mm Accessories 3 Blum spacer strip Material Colour Part no. Nylon Orion grey mat t 2 x Z95D4100 For mounting the pull-out runners, suitable for all Blum box and runner systems Planning Note Max. load bearing capacity 150 kg As the manufacturer, you are responsible for determining the actual load bearing capacity of the furniture manufactured by you that uses the SPACE STEP as per EN-14183, this value must also be stated on the manufacturer information sticker Possible cabinet heights The possible cabinet heights for the SPACE STEP are 150 –250 mm Recommended material A 3-ply panel (3S) at least 21 mm thick is recommended for the plinth step Recommended step sur face The step sur face must be anti-slip This can take the form of an anti-slip mat directly af fixed to the step sur face or by using anti-slip panel material In order to ensure that the SPACE STEP is held in position as securely as possible, the subsurface and the step sur face must be clean and dr y Cabinet width KB > 900 mm, use 4 Blum distance bumpers Attaching the labels EN-14183 requires both of the labels enclosed to be clearly displayed Pull- out underneath SPACE STEP Only 30 or 40 kg runners may be used The dynamic carr ying capacity for the pull-out underneath the SPACE STEP is 20 kg Cabinet above SPACE STEP If storage items are kept on the cabinet base above, we recommend protecting the base against sagging This measure will prevent the SPACE STEP from rubbing on the cabinet base Fur ther products ▬ Enables access to the next storage level up in wall cabinets ▬ Creates additional storage space in the pull-out underneath the SPACE STEP ▬ Can be combined with all Blum box and runner systems ▬ Can be combined with all Blum motion technologies ▬ High flexibility: SPACE STEP can be used in all living spaces
RkJQdWJsaXNoZXIy