Blum 百隆 2022-2023 产品手册和操作指南 2022-2023_zh-hant

FHo Y FAo 23 Catalogue 2022/2023 • KA-150 Wooden fronts and wide alu frames Web code DQD8YM Planning Asymmetrical Drilling position Theoret. cabinet height TKH (mm) H (mm) 480 – 549 TKH x 0.3 – 28 550 –1040 TKH x 0.3 – 57 4 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, lef t only * Drilling depth 5 mm ** Alternative drilling Space requirement TKH = FHo (mm) x 2 + gaps TKH Theoretical cabinet height FHo Upper front height FHu Lower front height Opening angle stop Y (mm) Without FHo x 0.44 + 38 104° FHo x 0.24 + 34 83° 0 FHo Upper front height The larger front must be at the top! Front assembly Theoret. cabinet height TKH (mm) X (mm) 177H3100 | 177H3100E | 177H3100E10 | 177H5100 | 175H3100 | 175H4100 175H5400 | 177H5400E 480 – 549 FHo / 2 + 70 FHo / 2 + 68 550 –1040 FHo / 2 + 47 FHo / 2 + 45 FHo Upper front height FHu Lower front height FAu Bot tom front overlay SFA Front overlay of the side panel CLIP top 120° hinge TB Drilling distance F Gap FAo Upper front overlay () CLIP top 120° special hinge CLIP top centre hinge TB Drilling distance F Min. gap 1.5 mm * 37 mm for cruciform mounting plates (37/32) Drilling distance TB MD Front overlay FA (mm) 5 6 7 8 9 10 11 12 13 14 15 16 17 0 3 4 5 6 3 3 4 5 6 6 3 4 5 6 9 3 4 5 6 MD Mounting plate spacing (mm) With the CLIP top 120° special hinge, the front overlay FA is always 2 mm larger Drilling distance TB MD Horizontal gap F (mm) between fronts 3 4 5 6 0 6 5 4 3 3 6 9 MD Mounting plate spacing (mm) Screw-on INSERTA | EXPANDO Reference pages Over view – AVENTOS HF 19 Ordering information – wooden fronts and wide alu frames 20 Planning – Blum distance bumper 29 SERVO-DRIVE switch 29 Machine directive 701 Assembly, removal and adjustment Short URL www.blum.com/a110 Lift systems 〉 AVENTOS HF – bi-fold lift system 〉 Standard | SERVO-DRIVE Lif t systems

RkJQdWJsaXNoZXIy