3b 1 3a 2 4 6 8 3d 3c 3e 7a 7b 34 1 〉 Lift systems 〉 AVENTOS HS top – up and over lift system 〉 Standard | SERVO-DRIVE Catalogue 2024/2025 Wooden fronts, wide and narrow alu frames Web code – click on the code or enter it in the Product Configurator DQDZPC Lift mechanism In order to select the correct lift mechanism, it is necessary to determine both the cabinet height KH and the front weight FG (including twice the handle weight) Example Cabinet height KH = 600 mm Front weight FG = 10 kg Incl. twice the handle weight Lift mechanism selection = 22S25x0 We recommend the more powerful lift mechanism for overlapping areas! A trial application is recommended when you are in a borderline area of the individual lift mechanism! Order information Standard SERVO-DRIVE 1 Lift mechanism set Fixing with pre-mounted system screws Cabinet height KH (mm) Front weight FG (kg) Part no. 350–450 450–540 2.00–11.50 2.50–12.50 22S2210 480–660 2.75–15.25 22S2510 650–800 3.50–18.50 22S2810 Consisting of: 1 2 x Lift mechanism (symmetrical) Incl. pre-mounted system screws Note The front weight FG can be increased by 50% if you use a third lift mechanism. We recommend using a third lift mechanism for wide cabinets. The reason for this is to prevent the middle of the front from sagging when open. 1 Lift mechanism set Fixing with chipboard screws with positioning system Cabinet height KH (mm) Front weight FG (kg) Part no. 350–450 450–540 2.00–11.50 2.50–12.50 22S2200 480–660 2.75–15.25 22S2500 650–800 3.50–18.50 22S2800 Consisting of: 1 2 x Lift mechanism (symmetrical) Incl. positioning system – 8 x Chipboard screws Ø 4 x 35 mm Note The front weight FG can be increased by 50% if you use a third lift mechanism. We recommend using a third lift mechanism for wide cabinets. The reason for this is to prevent the middle of the front from sagging when open. 2 Lever arm set Colour Material Part no. NI Steel 22S3500 Consisting of: 2a 2 x Symmetrical lever arm 3 Cover cap set Colour Material Part no. SW | HGR | TGR Nylon 22.8000 Consisting of: 3a 1 x Cover cap left 3b 1 x Cover cap right 3c 2 x Branding element, stamped with Blum logo IN-G 3 Cover cap set for SERVO-DRIVE Colour Material Part no. SW | HGR | TGR Nylon 23.8000 Consisting of: 3a 1 x SERVO-DRIVE cover cap left 3b 1 x Cover cap right 3c 2 x Branding element, stamped with Blum logo IN-G 3d 2 x SERVO-DRIVE switch 3e 6 x Blum distance bumper Ø 5 mm 4 Front fixing bracket set Version Fixing method Part no. Wooden fronts and wide alu frames 1 Screw-on 20S4200 Narrow alu frames 2 20S4200A Consisting of: 4 2 x Front fixing bracket 1 Use 4 chipboard screws (609.1x00) per side for wooden fronts Use 4 counter sunk self tapping screws (660.0950) per side for wide alu frames 2 Incl. 8 x counter sunk self tapping screw – 660.0950 4 Front fixing bracket Version Fixing method Part no. Thin fronts EXPANDO T 2 x 20S42T1 EXPANDO T suitable for thin fronts – see reference pages 6 SERVO-DRIVE set Colour Material Part no. TGR Nylon 23.A000 Consisting of: 6a 1 x Drive unit 6b 1 x SERVO-DRIVE distribution cable, 1500 mm 6c 1 x Connecting node 6d 2 x Cable end protector We recommend one drive unit per set for connected fronts! 8 Power supply unit housing – wall fixing 1 Colour Material Part no. WGR Nylon Z10NG120 Consisting of: 8 1 x Power supply unit housing – wall fixing 1 For SERVO-DRIVE power supply unit 1 ▬ Ideal for large fronts ▬ Cabinet height KH 350–800 mm ▬ Cabinet width KB up to 1800 mm ▬ Internal cabinet depth LT min. 264 mm ▬ Integrated BLUMOTION setting ▬ SERVO-DRIVE – the electrical motion support system ▬ Variable stop ▬ Fixed position of the lift mechanism and front fixing brackets ▬ Tool-free assembly ▬ Two different types of lift mechanism assembly ▬ 3-dimensional front adjustment
RkJQdWJsaXNoZXIy