NL + 3 209* 4.1 1 3.1 3.2 4.2 3.3 9 2.1a 2.1b 2.1c 2.2a 2.2c 2.2b 278 3 〉 Box systems 〉 MERIVOBOX 〉 Sink cabinet Catalogue 2024/2025 High fronted pull-out – BOXCAP – E – centre piece Web code – click on the code or enter it in the Product Configurator DQJD7Y Space requirement NL Nominal length * Incl. 2 mm tilt adjustment Order information 1 Cabinet profiles left /right Version BLUMOTION Nominal length NL (mm) Dynamic carrying capacity (kg) 40 70 450 450.4501B 453.4501B 500 450.5001B 453.5001B 550 450.5501B 453.5501B 600 450.6001B 453.6001B 2.1 Drawer side set exterior Drawer side height (mm) 91 Nominal length NL (mm) Colour SW-M | IG-M | OG-M 450 470M4502S 500 470M5002S 550 470M5502S 600 470M6002S Consisting of: 2.1a 1 x Lef t /right drawer sides 2.1b 2 x Branding element, stamped with Blum logo, custom printed from 1000 pcs 2.1c 2 x Cover caps 2.2 Drawer side set interior Drawer side height (mm) 91 Nominal length NL (mm)1 Colour SW-M | IG-M | OG-M 300 470M3002S 350 470M3502S 400 470M4002S 450 470M4502S Consisting of: 2. 2a 1 x Lef t /right drawer sides 2. 2b 2 x Branding element, stamped with Blum logo, custom printed from 1000 pcs 2. 2c 2 x Cover caps 1 For ef fective use of storage space, we recommend Nominal length NL drawer sides exterior (no 2.1) – nominal length NL drawer sides interior (no 2.2) = min. 150 mm 3.1 Chipboard back fixings left /right Colour Material Part no. SW-M | IG-M | OG-M Steel ZB4E000S 3.2 Chipboard back fixings left /right Colour Material Part no. SW-M | IG-M | OG-M Steel ZB4M000S 4.1 Front fixing bracket 1 Fixing method Part no. Screw-on 2 4 x ZF4.1002 EXPANDO T 3 4 x ZF4.10T2 1 INSERTA fixing is not possible in combination with a centre piece! The front fixing bracket must be installed turned through 180° for centre piece assembly! 2 Screws not included in scope of deliver y 3 EXPANDO T suitable for thin fronts – see reference pages 4.2 Front fixing bracket, top Fixing method Screws Part no. INSERTA – 2 x ZF4.50I2 Screw-on Chipboard screws Ø 3.8 x 11.4 mm 1 2 x ZF4.5002 Countersunk screw 2 2 x ZF4.5012 EXPANDO T 3 – 2 x ZF4.50T2 1 Pre-assembled 2 Countersunk screw with head diameter max. 7 mm, thread diameter max. 4 mm – screw not included in scope of deliver y 3 EXPANDO T suitable for thin fronts – see reference pages 9 BOXCAP left /right Colour SW-M | IG-M | OG-M Nominal length NL (mm) Part no. Nominal length NL (mm) Part no. 450 ZL4.450S.E 550 ZL4.550S.E 500 ZL4.500S.E 600 ZL4.600S.E Colour Colour SW-M Silk white mat t OG-M Orion grey mat t IG-M Indium grey mat t Accessories 3.3 Chipboard back fixing cover cap Colour Version Part no. SW-M | IG-M | OG-M Symmetrical 2 x ZB4M00AK – Chipboard screws 1 Diameter (mm) Length (mm) Part no. Ø 3.5 15.0 609.1500 17.0 609.1700 1 For front fixing We recommend chipboard screws Ø 4 x 15 mm for connecting the cabinet profile to the cabinet – System screw 1 Diameter (mm) Length (mm) Part no. Ø 6.0 14.5 661.1450.HG 1 For connecting the cabinet profile to the cabinet 3 ▬ With centre piece for optimal use of storage space ▬ Can be combined with standard components ▬ Distinctive drawer side design ▬ Drawer side straight on the inside with flush cover cap ▬ Synchronised feather-light glide ▬ Includes integrated BLUMOTION for sof t and ef for tless closing, and can be combined with SERVO -DRIVE, the electrical opening suppor t system, or TIP-ON BLUMOTION, the mechanical opening suppor t system ▬ Inser t the front in the holding position and simply clip on (easy at tachment even if pull-out is already in place) ▬ Tool-free front assembly ▬ 3-dimensional front adjustment
RkJQdWJsaXNoZXIy