137+MD+K 31 38 64 1 〉 Lift systems 〉 AVENTOS HK-XS – stay lift 〉 Standard | TIP-ON Catalogue 2024/2025 Wooden fronts, wide and narrow alu frames Web code – click on the code or enter it in the Product Configurator DQDDVY Planning Drilling position H = 137 + MD + K + SOB K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing SOB Top panel thickness () Internal cabinet depth LT 100 mm Space requirement LH Internal cabinet height * Min. 200 mm with visible wall hanging bracket () Internal cabinet depth LT 100 mm Y = (FH – X) x 0.3 CLIP top BLUMOTION 110° hinge Front thickness FD (mm) 16 19 22 24 X (mm) 45 34 23 15 FH Front height Front assembly – wooden fronts and wide alu frames Use 2 chipboard screws (609.1x00) for wooden fronts Use 2 counter sunk self tapping screws (660.0950) for wide alu frames FAo Upper front overlay SFA Front overlay of the side panel K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing () Internal cabinet depth LT 100 mm Front assembly – narrow alu frames FAo Upper front overlay SFA Front overlay of the side panel K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing () Internal cabinet depth LT 100 mm Narrow alu frames For frame width 19 mm, a side front overlay SFA of 11–18 mm is possible * When changing material thickness, adjust the assembly dimensions accordingly Space requirement – cornice | crown CLIP top BLUMOTION 110° hinge Front thickness FD (mm) 16 19 22 24 X (mm) 45 34 23 15 Minimum gap MF MFo Minimum gap at the top Depending on the hinge used MFu Minimum gap at the bot tom 1.5 mm 1
RkJQdWJsaXNoZXIy