711 10 〉 Information 〉 General Information 〉 Safety information Catalogue 2024/2025 Machine Safety Machine directive Reference pages Detailed information on the Machine Directive Short URL www.blum.com/s025 Reference pages 155° hinge 84 Reference pages Pull-outs with dangerous contents This safety data sheet provides information on the proper use of REVEGO and gives information about danger points. If standard wide angle hinges are used in furniture that can be accessed or reached by small children, then it should be noted that it is possible for small fingers to get in-between the working mechanism of the hinge. In these cases all relevant doors should be fit ted with child safety latches. Alternatively, manufacturers should use our specially-designed 155° wide angle safety hinge 7xx7xx0. Manufacturers must ensure that the end user is aware of this. Blum drawer systems are designed for domestic and contract use. If the drawer or pull-out is used to carry potentially dangerous items (e.g. sharp knives, domestic electrical appliances with sharp edges), then it is recommended that they are fit ted with pull-out stops or pull-out locks and child safety latches. This is especially impor tant when contents may pose a risk of injury (e.g. electrical appliances such as bread slicing machines, knives or other items with sharp edges). Blum assembly devices and machines are designed, constructed and tested according to the latest international safety standards. Extra at tention is also paid to operator safety in this regard. A comprehensive operations manual is supplied with each device and incorporates extensive instructions on installation and use. It is absolutely necessary that all operators read and adhere to the instructions therein. Under no circumstances should changes be made to any safety feature. SERVO-DRIVE drives for suppor ting the opening/closing of doors, wall cabinets and pull-outs are subject to the provisions of the European Machinery Directive 2006/42/EC. With reference to §64, four th indent, second point of the Guide to application of the Machinery Directive 2006/42/EC (Edition 2.2 of October 2019) and the interpretation of EFIC (European Furniture Industries Confederation), Blum SERVO-DRIVE drives are complete machines if they are used according to Blum specifications. All the requirements of the machinery directive are therefore met by the Blum declaration of conformity. Additional labelling of the furniture is not required. If furniture deviates from Blum specifications, conformity must be confirmed by the distributor of the furniture and a new type plate for the furniture must be at tached. Note: The EFIC position paper regarding the machinery directive can be viewed at www.efic.eu. Wide angle hinges – safety information We provide the pull-out stop for the following products LEGRABOX – 750 | 753 Integrated pull-out stop MERIVOBOX – 450 | 453 Integrated pull-out stop TANDEMBOX – 578 | 576 Integrated pull-out stop METABOX – 320 Separate pull-out stop, par t no. 320M0009.01 Additional tilt device for central locking MOVENTO – 760H | 766H Pull-out stop integrated into locking device TANDEM – 560H | 550H Pull-out stop integrated into locking device TANDEM – 560F | 550F Pull-out stop integrated into locking device TANDEM – 561H | 551H Integrated pull-out stop TANDEM – 561F | 551F Integrated pull-out stop All systems Child safety latch, par t no. 295.5501 + 320M0009.01 All other running systems do not come with safety accessories and are, therefore, unsuitable for use with potentially dangerous items REVEGO safety data sheet REVEGO safety data sheet Short URL www.blum.com/s026 10
RkJQdWJsaXNoZXIy