157 REVEGO pocket systems | Additional information and FAQs What are the points to note for accessories ABOVE the pocket system? In the case of accessories above the pocket system (e.g. removable top sections), the pocket connector must be taken into consideration. A cut-out may be necessary. Take into account that there must be a clearance of at least 6 mm to the top door edge. What needs to be considered for the door support on partition side? What kind of adjustments do we have for REVEGO? The door support on partition side adds 8 mm, so attention needs to be paid to the interior fittings and the height at which the door support is mounted. The support can be installed up to a height of 1,000 mm. Example: high fronted pull-out can collide with the unit REVEGO uno and REVEGO duo can be easily adjusted, once installed to achieve precise gaps. - Tilt and depth adjustments for the front gap. - Side and height gaps. - Door stabiliser. How can a handle be integrated with the pocket system, as it is relatively narrow? Protruding handles require a front protrusion as the pocket system does not provide space for a handle. This means that the fronts cannot be completely concealed. It is possible to use a smaller Nominal length to effect a protrusion; however, it is also possible to select a longer Nominal length and cut it to the desired length. 9 Catalogue 2024/2025
RkJQdWJsaXNoZXIy NDg2NzA=