3b 1 3a 2 4 6 8 3d 3c 3e 7a 7b 34 1 〉 Lift systems 〉 AVENTOS HS top – up and over lift system 〉 Standard | SERVO-DRIVE Catalogue 2024/2025 Wooden fronts, wide and narrow alu frames Web code – Click on the code or enter it in the Product Configurator DQDZPC Order information Standard SERVO-DRIVE 1 Lift mechanism set Fixing with pre -mounted system screws Cabinet height KH (mm) Front weight FG (kg) Part no. 350 – 450 450 – 540 2.00 –11.50 2.50 –12.50 22S2210 480 – 660 2.75 –15.25 22S2510 650 – 800 3.50 –18.50 22S2810 Consisting of: 1 2 x Lif t mechanism (symmetrical) Incl. pre-mounted system screws Note The front weight FG can be increased by 50% if you use a third lif t mechanism. We recommend using a third lif t mechanism for wide cabinets. The reason for this is to prevent the middle of the front from sagging when open. 1 Lift mechanism set Fixing with chipboard screws with positioning system Cabinet height KH (mm) Front weight FG (kg) Part no. 350 – 450 450 – 540 2.00 –11.50 2.50 –12.50 22S2200 480 – 660 2.75 –15.25 22S2500 650 – 800 3.50 –18.50 22S2800 Consisting of: 1 2 x Lif t mechanism (symmetrical) Incl. positioning system – 8 x Chipboard screws Ø 4 x 35 mm Note The front weight FG can be increased by 50% if you use a third lif t mechanism. We recommend using a third lif t mechanism for wide cabinets. The reason for this is to prevent the middle of the front from sagging when open. 2 Lever arm set Colour Material Part no. NI Steel 22S3500 Consisting of: 2a 2 x Symmetrical lever arm 3 Cover cap set Colour Material Part no. SW | HGR | TGR Nylon 22.8000 Consisting of: 3a 1 x Cover cap lef t 3b 1 x Cover cap right 3c 2 x Branding element, stamped with Blum logo IN-G 3 Cover cap set for SERVO -DRIVE Colour Material Part no. SW | HGR | TGR Nylon 23.8000 Consisting of: 3a 1 x SERVO-DRIVE cover cap lef t 3b 1 x Cover cap right 3c 2 x Branding element, stamped with Blum logo IN-G 3d 2 x SERVO-DRIVE switch 3e 6 x Blum distance bumper, Ø 5 mm 4 Front fixing bracket set Version Fixing method Part no. Wooden fronts and wide alu frames 1 Screw-on 20S4200 Narrow alu frames 2 20S4200A Consisting of: 4 2 x Front fixing bracket 1 Use 4 chipboard screws (609.1x00) per side for wooden fronts Use 4 counter sunk self tapping screws (660.0950) per side for wide alu frames 2 660.0950 4 Front fixing bracket Version Fixing method Part no. Thin fronts EXPANDO T 2 x 20S42T1 EXPANDO T suitable for thin fronts – see reference pages 6 SERVO -DRIVE set Colour Material Part no. TGR Nylon 23.A000 Consisting of: 6a 1 x Drive unit 6b 1 x SERVO-DRIVE distribution cable, 1500 mm 6c 1 x Connecting node 6d 2 x Cable end protector We recommend one drive unit per set for connected fronts! ▬ Ideal for large fronts ▬ Cabinet height KH 350 – 800 mm ▬ Cabinet width KB up to 1800 mm ▬ Internal cabinet depth LT min. 264 mm ▬ Integrated BLUMOTION set ting ▬ SERVO -DRIVE – the electrical motion suppor t system ▬ Variable stop ▬ Fixed position of the lif t mechanism and front fixing brackets ▬ Tool-free assembly ▬ Two dif ferent types of lif t mechanism assembly ▬ 3-dimensional front adjustment Lift mechanism In order to select the correct lif t mechanism, it is necessary to determine both the cabinet height KH and the front weight FG (including the handle) Example Cabinet height KH = 600 mm Front weight FG = 10 kg Incl. handle weight Lif t mechanism selection = 22S25x0 We recommend the more power ful lif t mechanism for overlapping areas! A trial application is recommended when you are in a borderline area of the individual lif t mechanism! 1
RkJQdWJsaXNoZXIy