64 63 128 101 38.5 71 SERVO-DRIVE Ø 10 127 Ø5 min 11.5 62.5 63 124 91.5 11 11 125.5 38.5 71 SERVO-DRIVE Ø 10 1 2 3 66 30 30 min 264 141 4 min 56 SERVO DRIVE 36 min LH c a b KH Y X SOB KH F FAu 32 32 32 12.5 FAo Z FH SFA F FAu 31 33 31 FAo KH Z FH 31 33 31 Z 42 1 〉 Lift systems 〉 AVENTOS HL top – lift up 〉 Standard | SERVO-DRIVE Catalogue 2024/2025 Wooden fronts, wide and narrow alu frames Web code – Click on the code or enter it in the Product Configurator DQE0EP Planning Drilling position – System screws Drilling position – Chipboard screws Positioning system – Chipboard screws Space requirement Lever arm set LH min. (mm)¹ 22L3200 255 22L3500 295 22L3800 345 22L3900 399 ¹ Dimensions based on lower gap F = 0 mm KH Cabinet height LH Internal cabinet height Lever arm set a (mm) b (mm)¹ c (mm) Y (mm)² 22L3200 112 272.5 155.5 272.5 22L3500 140.5 340 195 340 22L3800 176 425 245 425 22L3900 214.5 517 297.5 517 ¹ Dimensions based on lower gap F = 0 mm ² Dimensions based on top gap F = 0 mm KH Cabinet height Space requirement – Cornice | crown Top panel thickness SOB (mm) X (mm) 16 25 17 26 18 27 19 28 20 29 Front assembly – wooden fronts and wide alu frames Lever arm set Z (mm) 22L3200 113 + FAo 22L3500 153 + FAo 22L3800 203 + FAo 22L3900 256 + FAo F Gap FAo Upper front overlay FAu Bot tom front overlay SFA Front overlay of the side panel FH Front height KH Cabinet height Wall application: min. gap required 5 mm Front assembly – narrow alu frames Lever arm set Z (mm) 22L3200 113.5 + FAo 22L3500 153.5 + FAo 22L3800 203.5 + FAo 22L3900 256.5 + FAo F Gap FAo Upper front overlay FAu Bot tom front overlay FH Front height KH Cabinet height Wall application: min. gap required 5 mm Narrow alu frames For frame width 19 mm, a side front overlay SFA of 11–18 mm is possible * When changing material thickness, adjust the assembly dimensions accordingly 1
RkJQdWJsaXNoZXIy