137+MD+K 31 38 64 1 〉 Lift systems 〉 AVENTOS HK-XS – stay lift 〉 Standard | TIP-ON Catalogue 2024/2025 Wooden fronts, wide and narrow alu frames Web code – Click on the code or enter it in the Product Configurator DQDDVY Planning Drilling position H = 137 + MD + K + SOB K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing SOB Top panel thickness Space requirement LH Internal cabinet height * Min. 200 mm with visible wall hanging bracket Y = (FH – X) x 0.3 CLIP top BLUMOTION 110° hinge Front thickness FD (mm) 16 19 22 24 X (mm) 45 34 23 15 FH Front height Front assembly – wooden fronts and wide alu frames Use 2 chipboard screws (609.1x00) for wooden fronts Use 2 counter sunk self tapping screws (660.0950) for wide alu frames FAo Upper front overlay SFA Front overlay of the side panel K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing Front assembly – narrow alu frames FAo Upper front overlay SFA Front overlay of the side panel K Cranking of hinge arm Straight hinge arm – 0 mm Cranked hinge arm – 9.5 mm Double cranked arm – 18 mm MD Mounting plate spacing Narrow alu frames For frame width 19 mm, a side front overlay SFA of 11–18 mm is possible * When changing material thickness, adjust the assembly dimensions accordingly Space requirement – Cornice | crown CLIP top BLUMOTION 110° hinge Front thickness FD (mm) 16 19 22 24 X (mm) 45 34 23 15 Minimum gap MF MFo Minimum gap at the top Depending on the hinge used MFu Minimum gap at the bot tom 1.5 mm () Internal cabinet depth LT 100 mm () Internal cabinet depth LT 100 mm () Internal cabinet depth LT 100 mm () Internal cabinet depth LT 100 mm 1
RkJQdWJsaXNoZXIy