14 x 15b 15g 15e 15c 16 15d 17 15a 15f 15h 15h 230 3 〉 Box systems 〉 LEGRABOX 〉 Plinth solution Catalogue 2027/2028 LEGRABOX – SPACE STEP Web code – click on the code or enter it in the Product Configurator DQFA5C Order information Application recommendation Page LEGRABOX – drawer – N 196 LEGRABOX – drawer – M 198 LEGRABOX – drawer – K 202 15 SPACE STEP set Nominal length NL (mm) Colour Part no 410 OG-M Z95.4100 460 Z95.4600 Consisting of: 15a 1 x TANDEM 561Hxxx1B95, left | right 15b 2 x Vertical support 15c 2 x Corner connector 15d 2 x Support feet 15e 2 x Rear panel bracket 15f 1 x Front connector (magnet and catch plate) 15g 4 x Blum distance bumper Cabinet width KB > 900 mm, use 4 Blum distance bumpers 15h 2 x Sticker (safety information and manufacturer information sticker) – 14 x Pan headed screws Ø 4 x 15 mm – 1 x Installation instructions 16 Horizontal profile 1) Colour Material Length (mm)2) Part no OG-M Aluminium 1040 Z95Q1040A Cutting 16 Internal cabinet width LW – 130 mm 1 Cabinet width KB 1200 mm, use 2 pcs to prevent excessive bending 2 For cutting to size Accessories 17 Blum spacer strip 1) Colour Material Part no OG-M Nylon 2 x Z95D4100 1 For mounting the drawer runners, suitable for all Blum box and runner systems Colour OG-M Orion grey matt Planning Note Max load bearing capacity 150 kg As the manufacturer, you are responsible for determining the actual load bearing capacity of the furniture manufactured by you that uses the SPACE STEP as per EN-14183, this value must also be stated on the manufacturer information sticker. Possible cabinet heights – SPACE STEP 142–250 mm Recommended material A 3-ply panel (3S) at least 21 mm thick is recommended for the plinth step. Recommended step surface The step surface must be anti-slip. This can take the form of an anti-slip mat directly affixed to the step surface or by using anti-slip panel material. In order to ensure that the SPACE STEP is held in position as securely as possible, the subsurface and the step surface must be clean and dry. Cabinet width KB > 900 mm, use 4 Blum distance bumpers. Attaching the labels EN-14183 requires both of the labels enclosed to be clearly displayed. Drawer underneath SPACE STEP Only 30 or 40 kg runners may be used. The dynamic carrying capacity for the drawer underneath the SPACE STEP is 20 kg. Cabinet above SPACE STEP If storage items are kept on the cabinet base above, we recommend protecting the base against sagging. This measure will prevent the SPACE STEP from rubbing on the cabinet base. TIP-ON BLUMOTION We recommend an L5 unit when using TIP-ON BLUMOTION. 3 ▬ Enables access to the next storage level up in wall cabinets ▬ Creates additional storage space in the drawer underneath the SPACE STEP ▬ Can be combined with all Blum motion technologies ▬ High flexibility: SPACE STEP can be used in all living spaces
RkJQdWJsaXNoZXIy