Ø 10+ 0.1*̶ 0.1 1 2 3 611 9 〉 Further products 〉 Fixing systems Catalogue 2027/2028 Fixing system for thin fronts – EXPANDO T Planning Area of application – EXPANDO T EXPANDO T is suitable for fixing Blum fittings to thin front materials in furniture manufacturing With sufficient stability and strength, front materials of 8 mm thickness and above may be used Area of application and assembly recommendation Materials tested by Blum Transverse tensile strength (N/mm²) Min tightening torque (Nm) Chipboard > 0.40 1.5 MDF > 0.60 1.5 HDF 2 HPL 2 Mineral composites 2 Nero Assoluto natural granite stone 3 Quartz composite artificial stone 3 Ceramic plates 3 Drilling depth | screw selection – EXPANDO T Screws with M4 thread have to be used for EXPANDO T single The lowest possible drilling depth should be selected for the single dowel, depending on the screw length BT Drilling depth ES Screw penetration depth ES min = 4 mm ES max = BT – 0.5 mm * Stone and ceramic +0.2/–0.1 mm Assembly – EXPANDO T Limitation of liability Blum accepts no liability for the use of EXPANDO T in combination with materials not listed or fittings from other manufacturers It is recommended that the assembly be carried out by an experienced furniture manufacturer Reference pages Overview 607 AVENTOS HS top – up and over lift system 24 AVENTOS HL top – lift up 30 AVENTOS HK top – stay lift 36 CLIP top BLUMOTION | CLIP top – hinges 66 LEGRABOX 192 MERIVOBOX 250 Front/base stabiliser for thin fronts 245 More on our EXPANDO T fixing system Short URL www.blum.com/EXPANDO_T_3 Assembly, removal and adjustment Short URL www.blum.com/a720 9
RkJQdWJsaXNoZXIy